Re: AS Path

From: Neil McKee (neil_mckee@inmon.com)
Date: 03/28/01

Next message: Neil McKee: "Problem with HP2524 switches"

Previous message: Neil McKee: "Re: Monitor Traffic question"
In reply to: Robert.Garcia@corp.valueweb.com: "RE: AS Path"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Robert,

We recently fixed a problem with the netflow softwareKey. You might
find that upgrading to version 1.2.21 will cure what you are seeing.
(This problem would affect installations where the
/home/inmon/config/probe.ini file had "localhost" for the collector
host).

Please call us on 415-661-6343 so we can understand the problem better.

regards,
neil

----
Neil McKee
InMon Corp.
Robert.Garcia@corp.valueweb.com wrote:
> 
> Peter,
> 
>      I configured it with both of these lines and it only shows AS Path "0"
> which I assume is meant to mean local...  Any ideas?
> 
> Robert Garcia
> 
> 
>                     "Peter Phaal"
>                     <Peter_Phaal@inmon.com>         To:     <traffic-management@inmon.com>
>                     Sent by:                        cc:
>                     owner-traffic-management        Subject:     RE: AS Path
>                     @inmon.com
> 
> 
>                     03/22/2001 02:13 PM
>                     Please respond to
>                     traffic-management
> 
> 
> 
> Robert,
> 
> Did you configure your router to provide AS data when you configured
> NetFlow? You need to set either:
> 
>   ip flow-export version 5 origin-as
> 
> or:
> 
>   ip flow-export version 5 peer-as
> 
> With NetFlow you need to decide whether to include origin-as information or
> peer-as information, you cannot have both. You would need to use an sFlow
> probe if you wanted to have access to full AS path information.
> 
> You can check to see if Traffic Server is recieving AS information by
> clicking on the Monitor button and then the Traffic option. Click on any of
> the top box in the Frames column to see a table of interface statistics. At
> the bottom of the table select Top Destination AS Paths to see if there is
> any AS data available.
> 
> Regards,
> Peter
> ----------------------
> Peter Phaal
> InMon Corp.
> 
> Peter_Phaal@inmon.com
> 
> > -----Original Message-----
> > From: owner-traffic-management@inmon.com
> > [mailto:owner-traffic-management@inmon.com]On Behalf Of
> > Robert.Garcia@corp.valueweb.com
> > Sent: Thursday, March 22, 2001 10:43 AM
> > To: traffic-management@inmon.com
> > Subject: AS Path
> >
> >
> > Hello,
> >
> >      I am trying to utilize the Traffic Server to find and
> > adjust peers on
> > our network.  I setup the machine and the software is
> > running.  I am using
> > one of our core routers as a test...  I get all kinds of
> > information but
> > the AS information appears with "No Data".  I have tried
> > several things to
> > try and get it to work but no luck so far.  I am using the Netflow
> > information to try and populate the graph...  Can someone
> > help me out with
> > this.. Thanks..
> >
> >
> >
> > Robert Garcia
> >
> >
> >
> >
> >
-- 
---------
Neil McKee mailto:Neil_McKee@InMon.com
InMon Corp.  http://www.InMon.com

Next message: Neil McKee: "Problem with HP2524 switches"
Previous message: Neil McKee: "Re: Monitor Traffic question"
In reply to: Robert.Garcia@corp.valueweb.com: "RE: AS Path"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : 03/28/01 EST