Re: Re: 3.0 features

From: Neil McKee (neil_mckee@inmon.com)
Date: 05/13/03

  • Next message: Neil McKee: "Re: Re: RRD reports"

    > So I can create IPV4 protocol groups too? What about Ethernet etc?

    Yes. Anything that can appear as a protocol type.

    > On a separate 3.0 issue, I have noticed that a monitor applet feature
    > appears to have gone away:
    >
    > http://server/its/monitor?address=0x000102010203&addressType=MAC
    >
    > This link used to display a top connections chart for the switch port
    > associated with this MAC (or IP address etc)

    You are right. It seems to be missing.

    > This doesn't seem to work anymore - now I have to do something like
    > query IP->MAC->Switch port, and then generate a link using that queried
    > information:
    >
    > http://server/its/monitor?agent=10.1.0.10&interface=1

    Yes. The first servlet to use is available under
    Query->Other->AddressLocation. For example:

    <http://demo.inmon.com/its/query/AddressLocation?addressType=MAC&address=00306E1300D7&resultFormat=csv>

    Once you have the agent-address and port you can give it to the Monitor
    servlet like this:

    <http://demo.inmon.com/its/query/Monitor?agent=10.10.122.17&interface=591>

    > This introduces an extra step. Did I miss something?

    You didn't miss anything. In fact, we should investigate and see if we
    can put that feature back...

    regards,
    neil

    > Tim:> 

    -- 
Neil McKee, InMon Corp.
tel: +1 (415) 661-6343
http://www.inmon.com

    This archive was generated by hypermail 2.1.4 : 05/13/03 PDT